Beatbot AquaSense 2 Robotic Pool Cleaner + Beatbot Robotic Pool Skimmer Bundle

Create a more complete automated pool-cleaning system with the Beatbot AquaSense 2 Robotic Pool Cleaner + Beatbot Robotic Pool Skimmer Bundle, pairing deep underwater cleaning with dedicated water-surface debris removal.

The Beatbot AquaSense 2 handles the pool floor, walls, and waterline with intelligent cordless navigation, powerful suction, active brushing, and up to approximately 4 hours of continuous floor cleaning.

At the water surface, your selected Beatbot skimmer continuously collects floating leaves, insects, pollen, flowers, and other debris before it has the chance to sink.

Choose between the Beatbot iSkim for powerful solar-assisted everyday surface cleaning or upgrade to the Beatbot iSkim Ultra for additional intelligent navigation, dual side brushes, ClearWater™ clarification support, temperature monitoring, voice broadcasts, and magnetic wireless charging.

Together, the two robots provide surface-to-floor pool cleaning without requiring a floating power cable or relying on a single robot to handle every area of the pool.

Two Robots, Complete Pool Coverage

This bundle divides pool cleaning between two purpose-built robotic systems.

The AquaSense 2 concentrates on underwater surfaces:

• Pool floor

• Pool walls

• Waterline

The selected Beatbot robotic skimmer remains at the water surface to collect floating debris.

Using separate robots allows surface skimming and underwater cleaning to be handled simultaneously when desired.

AquaSense 2 for Deep Underwater Cleaning

The AquaSense 2 is Beatbot’s cordless 3-in-1 robotic pool cleaner.

It uses CleverNav™ Smart Navigation and a network of 16 sensors to optimize its route throughout the pool.

A powerful 4-motor system generates up to approximately 5,500 GPH of water flow, while active roller brushes loosen dirt and debris for collection by the integrated filtration system.

Floor, Wall & Waterline Cleaning

The AquaSense 2 automatically transitions between supported underwater surfaces.

It systematically cleans the pool floor, climbs compatible walls, and performs dedicated dual-pass waterline scrubbing.

This allows the AquaSense 2 to focus on the underwater areas where dirt, sand, hair, leaves, and other debris commonly accumulate.

Up to 4 Hours of AquaSense 2 Floor Cleaning

A large 10,000mAh lithium-ion battery provides up to approximately 4 hours of continuous floor cleaning under supported operating conditions.

Beatbot recommends the AquaSense 2 for pools with up to approximately 3,230 sq. ft. of bottom area.

Actual runtime varies according to cleaning mode, pool geometry, wall climbing, water temperature, battery condition, and other operating factors.

AquaSense 2 Wireless Charging

The AquaSense 2 recharges using Beatbot’s wireless charging dock.

A complete charge takes approximately 4 hours under normal conditions.

AquaSense 2 Automatic Surface Parking

When cleaning is complete or battery power becomes low, the AquaSense 2 can automatically rise to the water surface and position itself near the pool edge.

SmartDrain™ then releases retained water to make lifting the robot easier.

Choose Your Surface Skimmer

The bundle is available with either the Beatbot iSkim or the more advanced Beatbot iSkim Ultra.

Both options provide dedicated robotic water-surface cleaning, but their feature sets are different.

AquaSense 2 + iSkim

Choose the AquaSense 2 + iSkim bundle for straightforward surface-to-floor automated cleaning.

The iSkim provides:

• Dedicated water-surface cleaning

• Solar-assisted operation

• 24W solar panel

• 10,000mAh battery

• Up to approximately 28 hours of runtime

• 9L debris basket

• Dual guided wheels for edge and corner coverage

• Ultrasonic obstacle avoidance

• Anti-spill debris retention

• Smart water-surface parking

• App monitoring, scheduling, and control

• Wi-Fi and Bluetooth connectivity

This combination is particularly useful for pools that regularly collect leaves and other floating debris.

AquaSense 2 + iSkim Ultra

Upgrade to the AquaSense 2 + iSkim Ultra bundle when you want more advanced surface-cleaning intelligence and additional water-care features.

The iSkim Ultra adds features including:

• Intelligent planned cleaning paths

• 20-sensor navigation system

• 7-motor system

• Dual rotating side brushes

• 9L debris basket

• 24W SolarTrack™ solar charging

• 10,000mAh battery

• ClearWater™ water-clarification support

• Water-temperature monitoring

• Environmental-temperature monitoring

• Voice status broadcasts

• App remote control and scheduling

• Automatic poolside parking

• Magnetic wireless charging

The Ultra configuration is the more advanced choice for customers who want greater surface-navigation intelligence and supported clarification functionality.

Dedicated Surface Cleaning

Both iSkim configurations are designed specifically to clean floating debris at the water surface.

They collect material such as:

• Leaves

• Pollen

• Flowers

• Grass

• Seeds

• Insects

• Other floating debris

Removing debris before it sinks can reduce the amount of material the AquaSense 2 needs to collect from the bottom later.

Large 9L Surface Debris Capacity

Both bundle skimmer options use an extra-large 9-liter debris basket.

The large capacity is particularly useful in tree-lined environments and during seasons when leaves and other organic debris enter the pool more frequently.

Solar-Assisted Surface Cleaning

Both iSkim options incorporate a 24W solar panel and rechargeable battery.

Solar energy helps extend surface-cleaning operation during daylight hours while stored battery power supports continued operation when sunlight is reduced.

Actual runtime depends on sunlight, weather, shading, pool conditions, battery condition, and cleaning load.

App-Connected Pool Care

The AquaSense 2 and selected Beatbot skimmer connect with the Beatbot App for supported settings, operating information, scheduling, and smart functions.

Exact app functionality varies by device.

Cordless Cleaning Above & Below the Surface

Both robots operate from rechargeable battery systems.

There is no floating electrical cable trailing behind either cleaner during normal operation.

This provides a cleaner pool environment and eliminates the cable tangling associated with traditional corded robotic cleaners.

Key Features

Surface-to-Floor Pool Cleaning

Combines dedicated water-surface cleaning with automated floor, wall, and waterline cleaning.

Two Purpose-Built Robots

Uses a dedicated underwater AquaSense 2 and a dedicated Beatbot surface skimmer rather than asking one machine to perform every task.

Simultaneous Cleaning Capability

The underwater cleaner and surface skimmer can operate independently, allowing multiple areas of the pool to be cleaned at the same time.

AquaSense 2 3-in-1 Cleaning

Automatically cleans the floor, walls, and waterline.

CleverNav™ Smart Navigation

Intelligent navigation optimizes AquaSense 2 cleaning paths for more systematic coverage.

16 AquaSense 2 Sensors

A network of 16 sensors supports underwater navigation and obstacle detection.

5,500 GPH AquaSense 2 Water Flow

The AquaSense 2 provides up to approximately 5,500 gallons per hour of water flow.

10,000mAh AquaSense 2 Battery

Supports up to approximately 4 hours of floor cleaning.

AquaSense 2 Wireless Charging

Uses Beatbot’s wireless charging dock for convenient recharging.

Dual-Pass Waterline Cleaning

The AquaSense 2 provides dedicated dual-pass scrubbing along the waterline.

AquaSense 2 Surface Parking

Automatically rises to the water surface after cleaning for easier retrieval.

9L Skimmer Basket

Both skimmer options provide a large 9-liter surface-debris basket.

24W Solar Charging

Both skimmer configurations use a 24-watt solar panel to support extended surface-cleaning operation.

10,000mAh Skimmer Battery

A high-capacity battery supports continued surface cleaning when direct sunlight is limited.

Smart Obstacle Avoidance

The selected Beatbot skimmer uses supported sensing technology to detect obstacles and navigate around the pool surface.

Beatbot App Connectivity

Access supported monitoring, controls, scheduling, and smart functions through the Beatbot App.

Cordless Operation

Both devices operate without a floating power cable during cleaning.

Specifications

What's Included

AquaSense 2 + iSkim Bundle

• 1 × Beatbot AquaSense 2 Robotic Pool Cleaner

• 1 × AquaSense 2 Wireless Charging Dock

• 1 × Beatbot iSkim Robotic Pool Skimmer

• Integrated 2L AquaSense 2 Filter Basket

• Integrated 9L iSkim Debris Basket

• Charging equipment supplied with each applicable device

• Standard accessories supplied by Beatbot

• Manufacturer documentation

AquaSense 2 + iSkim Ultra Bundle

• 1 × Beatbot AquaSense 2 Robotic Pool Cleaner

• 1 × AquaSense 2 Wireless Charging Dock

• 1 × Beatbot iSkim Ultra Robotic Pool Skimmer

• Integrated 2L AquaSense 2 Filter Basket

• Integrated 9L iSkim Ultra Debris Basket

• Integrated ClearWater™ Dispensing System

• Magnetic wireless charging equipment for iSkim Ultra

• Standard accessories supplied by Beatbot

• Manufacturer documentation

Compatible ClearWater™ clarifying agent and other optional accessories are not included unless specifically stated with the purchased configuration or promotion.

Warranty

The Beatbot AquaSense 2 includes Beatbot’s 3-year full replacement warranty.

Warranty coverage for the selected robotic pool skimmer is provided according to Beatbot’s applicable warranty terms for that model.

Important Bundle Selection Notice

This product is available in two different bundle configurations:

AquaSense 2 + iSkim — standard solar-assisted surface skimming.

AquaSense 2 + iSkim Ultra — upgraded intelligent surface skimming with ClearWater™ clarification support and additional smart features.

Features specific to the iSkim Ultra should not be assumed to be included with the standard iSkim bundle.

Important Surface Cleaning Notice

The AquaSense 2 itself does not clean floating debris from the water surface.

Water-surface cleaning in this bundle is provided by the included Beatbot robotic pool skimmer.

The AquaSense 2’s surface-parking capability is intended for retrieval after underwater cleaning and should not be confused with surface skimming.

Important ClearWater™ Notice

ClearWater™ functionality applies only to the iSkim Ultra configuration.

Compatible clarifying agent should be used according to Beatbot’s instructions and does not replace appropriate pool sanitation, filtration, water testing, chemical balancing, or other required maintenance.

Important Solar Charging Notice

Solar-assisted skimmer runtime depends on sunlight intensity, weather, shading, season, solar-panel cleanliness, pool conditions, battery condition, and debris load.

Published maximum runtimes should not be interpreted as guaranteed continuous operation under every environment.

Important Charging Notice

Remove and charge the AquaSense 2 according to Beatbot’s instructions.

Follow the charging requirements supplied with the selected Beatbot skimmer and keep charging equipment appropriately protected from pool water and weather.

Important Pool Compatibility Notice

Both devices support a broad range of residential pool shapes and surfaces, but performance can vary according to pool geometry, steps, ledges, wall angles, drains, obstacles, surface condition, water chemistry, and other characteristics.