Beatbot Sora 30 Robotic Pool Cleaner + Beatbot iSkim Robotic Pool Skimmer Bundle

Create a complete automated pool-cleaning system with the Beatbot Sora 30 Robotic Pool Cleaner + Beatbot iSkim Robotic Pool Skimmer Bundle, combining powerful underwater cleaning with dedicated water-surface debris removal.

The Beatbot Sora 30 handles the pool floor, walls, waterline, and supported shallow-water platforms with 6,800 GPH suction, intelligent SonicSense™ obstacle avoidance, active roller brushes, and up to approximately 5 hours of floor cleaning.

At the water surface, your selected Beatbot iSkim continuously collects floating leaves, insects, pollen, flowers, grass, seeds, and other debris before it has a chance to sink.

Choose the Sora 30 + iSkim configuration for powerful solar-assisted surface cleaning, or upgrade to the Sora 30 + iSkim Ultra for Beatbot's more advanced surface-skimming system with enhanced navigation, dual side brushes, ClearWater™ clarification support, temperature monitoring, voice status broadcasts, and magnetic wireless charging.

With two purpose-built cordless robots working independently, this bundle provides automated cleaning from the water surface down to the pool floor — including shallow platforms that many conventional robotic cleaners cannot reach.

Two Robots for Complete Pool Care

Instead of asking a single robot to handle every area of the pool, this bundle combines two specialized cleaning systems.

The Sora 30 handles:

• Pool floor

• Shallow-water areas

• Tanning ledges and compatible platforms

• Pool walls

• Waterline

The selected Beatbot iSkim handles:

• Water-surface debris

• Floating leaves

• Pollen

• Flowers

• Grass and seeds

• Insects

• Other floating material

Because the two robots operate independently, surface and underwater cleaning can take place simultaneously when desired.

Beatbot Sora 30 All-Area Underwater Cleaning

The Sora 30 is designed to clean substantially more than just the bottom of the pool.

It automatically transitions between the floor, shallow-water areas, supported platforms, walls, and waterline.

This broad underwater coverage makes it particularly useful for modern pools with tanning ledges, sun shelves, swim-outs, and large submerged steps.

Shallow-Water Cleaning Down to 8 Inches

One of the Sora 30's defining capabilities is its ability to operate in water as shallow as approximately 8 inches.

This allows the robot to clean compatible shallow-water areas that may be inaccessible to conventional robotic pool cleaners.

Beatbot specifies supported platforms measuring at least approximately 3.3 ft × 3.3 ft.

Actual shallow-area performance depends on water depth, platform dimensions, slope, surface material, and pool geometry.

Powerful 6,800 GPH Suction

The Sora 30 generates up to approximately 6,800 gallons per hour of water flow.

Its powerful suction system is designed to capture leaves, dirt, sand, hair, insects, acorns, and other common pool debris.

A wide 6.7-inch suction inlet provides a broad collection path as the robot moves across supported surfaces.

SonicSense™ Obstacle Avoidance

Beatbot's SonicSense™ Obstacle Avoidance helps the Sora 30 detect obstacles and adjust its movement while cleaning.

A network of 13 sensors, including two ultrasonic sensors, provides environmental information for navigation and path optimization.

Optimized S-Shaped Navigation

On the pool floor, the Sora 30 follows optimized S-shaped cleaning paths.

Systematic navigation helps improve coverage while reducing unnecessary overlap and random movement.

Four-Motor Cleaning System

The Sora 30 uses a four-motor system to power its cleaning and navigation functions.

The system works with the robot's tracks, suction system, and brushes to provide strong movement across floors, walls, waterlines, and supported shallow areas.

Four Bottom Roller Brushes

Four active bottom roller brushes are arranged in Beatbot's Dual-Group Roller Brush System.

The brushes scrub supported pool surfaces and loosen dirt and debris before it is drawn into the filtration system.

Large 5.2L Debris Basket

The Sora 30 includes a large 5.2-liter filter basket.

The increased capacity helps reduce the need to interrupt a cleaning cycle to empty collected leaves, insects, hair, sand, and other debris.

150-Micron Standard Filtration

The included Sora 30 filtration system captures particles down to approximately 150 microns for routine pool cleaning.

Beatbot also offers an optional 3-micron ultra-fine filtration accessory for finer particle collection.

The 3-micron filter is sold separately unless specifically included with the purchased configuration.

10,000mAh Battery

A high-capacity 10,000mAh lithium-ion battery powers the Sora 30.

Beatbot specifies up to approximately 5 hours of floor-only cleaning and approximately 4.5 hours when cleaning the floor, walls, and waterline under laboratory conditions.

Actual runtime varies according to cleaning mode, pool geometry, shallow-area operation, wall climbing, water temperature, battery condition, and other operating factors.

Up to 3,230 Sq. Ft. Coverage

The Sora 30 is designed for pools with up to approximately 3,230 sq. ft. (300 m²) of cleaning coverage.

Its extended battery runtime and intelligent navigation make it suitable for many medium and large residential pools.

Smart Water-Surface Parking

When cleaning is complete or battery power becomes low, the Sora 30 can automatically rise toward the water surface for easier retrieval.

This eliminates the need to manually retrieve the cleaner from the bottom of the pool.

The Sora 30's surface-parking feature is for retrieval — the Sora 30 itself does not perform water-surface skimming.

Surface debris collection in this bundle is handled by the included iSkim or iSkim Ultra.

Beatbot App Connectivity

The Sora 30 supports:

• 2.4 GHz Wi-Fi

• 5 GHz Wi-Fi

• Bluetooth

• Beatbot App connectivity

When the Sora 30 is at the water surface and online, supported cleaning modes can be selected through the app.

While the robot is submerged, underwater navigation is handled autonomously by the onboard system.

65W Fast Charging

The Sora 30 uses Beatbot's Ultra-Safe Titanium Charging Plug with approximately 65W fast charging.

A complete recharge takes approximately 4.5 hours under supported charging conditions.

Choose Your Beatbot Surface Skimmer

This bundle is available with either the Beatbot iSkim or the more advanced Beatbot iSkim Ultra.

Both provide dedicated robotic water-surface cleaning but offer different feature sets.

Sora 30 + Beatbot iSkim

Choose the Sora 30 + iSkim configuration for powerful automated underwater and water-surface cleaning at an excellent overall value.

The iSkim provides:

• Dedicated robotic water-surface cleaning

• Solar-assisted operation

• 24W solar panel

• 10,000mAh battery

• Up to approximately 28 hours of surface-cleaning runtime

• Large 9L debris basket

• Ultrasonic obstacle detection

• Smart navigation

• Anti-spill debris retention

• App control and scheduling

• Wi-Fi and Bluetooth connectivity

• Automatic poolside parking

This configuration combines the Sora 30's shallow-water and underwater cleaning capabilities with a dedicated surface robot for floating debris.

Sora 30 + Beatbot iSkim Ultra

Choose the Sora 30 + iSkim Ultra configuration when you want Beatbot's more advanced surface-cleaning technology.

The iSkim Ultra adds features including:

• Advanced intelligent surface navigation

• 20 high-precision sensors

• Tri-ultrasonic sensing

• 7-motor system

• Dual rotating side brushes

• Extra-long front roller brush

• Large 9L debris basket

• 24W SolarTrack™ solar charging

• 10,000mAh battery

• ClearWater™ clarification support

• Water-temperature monitoring

• Environmental-temperature monitoring

• Voice status broadcasts

• App remote navigation

• Cleaning and clarification scheduling

• Automatic poolside parking

• Magnetic wireless charging

The Ultra configuration is the more advanced choice for pools where edge and corner cleaning, intelligent navigation, and additional water-care functionality are priorities.

Dedicated Water-Surface Cleaning

The included Beatbot skimmer continuously targets debris floating at the water surface.

Removing leaves, insects, pollen, flowers, grass, and other debris before it sinks reduces the amount of material that eventually reaches the pool floor.

This also allows the Sora 30 to concentrate on its primary job: cleaning underwater surfaces and shallow areas.

Large 9L Surface-Debris Basket

Both iSkim configurations provide a large 9-liter debris basket.

The high capacity is particularly useful for pools surrounded by trees or landscaping where floating debris can accumulate quickly.

Solar-Assisted Operation

Both iSkim options use a 24W solar panel together with a 10,000mAh rechargeable battery.

Solar energy helps extend cleaning operation during daylight hours while stored battery power allows continued operation when sunlight is limited.

Actual solar performance and runtime depend on sunlight intensity, weather, shading, season, panel cleanliness, battery condition, debris load, and other environmental factors.

One Beatbot Ecosystem

Both the Sora 30 and selected iSkim integrate with the Beatbot App for supported monitoring, settings, scheduling, and smart functions.

Exact app functionality varies by device.

Completely Cordless Pool Cleaning

Both robots operate from rechargeable batteries during cleaning.

There is no floating electrical cable trailing behind either cleaner, reducing clutter in the pool and eliminating the cable tangling associated with conventional corded robotic cleaners.

Key Features

Surface-to-Floor Pool Cleaning

Combines dedicated water-surface skimming with automated shallow-area, floor, wall, and waterline cleaning.

Two Purpose-Built Robots

A dedicated Sora 30 handles underwater cleaning while a dedicated iSkim handles floating surface debris.

Simultaneous Cleaning

Both robots can operate independently, allowing the water surface and underwater areas to be cleaned at the same time.

Shallow-Water Cleaning

The Sora 30 operates in water as shallow as approximately 8 inches.

Platform & Tanning-Ledge Cleaning

Supports compatible shallow platforms measuring at least approximately 3.3 ft × 3.3 ft.

6,800 GPH Sora 30 Suction

Powerful high-flow suction captures common pool debris.

SonicSense™ Obstacle Avoidance

Ultrasonic sensing helps the Sora 30 identify obstacles and optimize its movement.

13 Sora 30 Sensors

Includes 13 sensors with two ultrasonic sensors for navigation and environmental awareness.

Four Sora 30 Motors

A four-motor architecture powers cleaning and movement.

Four Bottom Roller Brushes

Beatbot's Dual-Group Roller Brush System actively scrubs supported pool surfaces.

5.2L Sora 30 Filter Basket

Large underwater debris capacity supports extended cleaning sessions.

150-Micron Filtration

Included filtration captures common everyday pool debris.

10,000mAh Sora 30 Battery

Provides up to approximately 5 hours of floor-only cleaning.

Up to 3,230 Sq. Ft. Coverage

Designed for pools with up to approximately 3,230 sq. ft. (300 m²) of cleaning coverage.

Smart Water-Surface Parking

The Sora 30 automatically rises toward the surface for easier retrieval.

9L Skimmer Basket

Both iSkim configurations provide substantial surface-debris storage.

24W Solar Panel

Both skimmer options use solar energy to extend surface-cleaning operation.

10,000mAh Skimmer Battery

Provides stored energy for operation when direct sunlight is limited.

Beatbot App Connectivity

Both robots provide supported smart functionality through the Beatbot App.

Cordless Operation

Both devices clean without a floating power cable.

Specifications

What's Included

Sora 30 + iSkim Bundle

• 1 × Beatbot Sora 30 Robotic Pool Cleaner

• 1 × Beatbot iSkim Robotic Pool Skimmer

• 1 × Sora 30 5.2L Filter Basket

• 1 × iSkim 9L Debris Basket

• 150-Micron Sora 30 Filtration

• Sora 30 charging equipment

• iSkim charging equipment supplied with the unit

• Standard accessories supplied by Beatbot

• Manufacturer documentation

Sora 30 + iSkim Ultra Bundle

• 1 × Beatbot Sora 30 Robotic Pool Cleaner

• 1 × Beatbot iSkim Ultra Robotic Pool Skimmer

• 1 × Sora 30 5.2L Filter Basket

• 1 × iSkim Ultra 9L Debris Basket

• 150-Micron Sora 30 Filtration

• Integrated iSkim Ultra ClearWater™ dispensing system

• Sora 30 charging equipment

• iSkim Ultra magnetic wireless charging equipment

• Standard accessories supplied by Beatbot

• Manufacturer documentation

Compatible ClearWater™ clarifying agent, optional 3-micron Sora 30 filter, caddies, protective covers, and other optional accessories are sold separately unless specifically stated with the purchased configuration.

Warranty

The Beatbot Sora 30 includes a 2-year manufacturer's warranty.

Warranty coverage for the selected iSkim is provided according to Beatbot's applicable warranty terms for that model.

Important Bundle Selection Notice

This product is available in two configurations:

Sora 30 + iSkim — solar-assisted dedicated surface cleaning paired with Sora 30 underwater and shallow-platform cleaning.

Sora 30 + iSkim Ultra — upgraded surface cleaning with enhanced navigation, dual side brushes, ClearWater™ clarification support, temperature monitoring, voice broadcasts, and magnetic wireless charging.

Features specific to the iSkim Ultra should not be assumed to be included with the standard iSkim configuration.

Important Surface Cleaning Notice

The Sora 30 itself does not clean floating debris from the water surface.

Its Smart Water-Surface Parking functionality is designed for easier retrieval after underwater cleaning.

Actual water-surface debris collection in this bundle is performed by the included iSkim or iSkim Ultra.

Important Shallow-Water Notice

The Sora 30 can operate in water as shallow as approximately 8 inches and clean compatible platforms measuring at least approximately 3.3 ft × 3.3 ft.

Actual shallow-area performance depends on water depth, platform dimensions, slope, surface, and pool geometry.

Important ClearWater™ Notice

ClearWater™ clarification functionality applies only to the iSkim Ultra configuration.

Compatible Beatbot clarifying agent is required and should be used according to the manufacturer's instructions.

Clarification supplements normal pool maintenance and does not replace appropriate sanitation, filtration, water testing, or chemical balancing.

Important App Control Notice

The Sora 30 supports app connectivity, but it cannot be manually driven through the app while submerged.

When the Sora 30 is at the water surface and online, supported cleaning modes and retrieval functionality can be accessed through the Beatbot App.

Important Solar Charging Notice

Solar-assisted skimmer performance depends on available sunlight, weather, shading, season, solar-panel cleanliness, battery condition, and debris load.

Published maximum runtimes should not be interpreted as guaranteed continuous operation under all conditions.

Important Charging Notice

Remove the Sora 30 from the pool before charging and use the supplied Beatbot charging equipment according to the manufacturer's instructions.

Follow the charging requirements supplied with the selected iSkim model and keep charging equipment appropriately protected from pool water and weather.