Beatbot Sora 70 Robotic Pool Cleaner

Take automated pool cleaning beyond the deep end with the Beatbot Sora 70 Robotic Pool Cleaner, an advanced cordless cleaner designed to cover the water surface, shallow areas and platforms, pool floor, walls, and waterline.

Unlike many robotic cleaners that struggle once they reach large steps, tanning ledges, or shallow platforms, the Sora 70 is designed to operate in water as shallow as 8 inches and clean supported platforms measuring at least approximately 3.3 ft × 3.3 ft.

Beatbot's JetPulse™ Water-Surface Cleaning System uses twin converging water jets to actively pull floating debris toward the robot, while a powerful 6,800 GPH suction system, four bottom roller brushes, and a large 6-liter debris basket tackle dirt and debris below the surface.

Navigation is powered by SonicSense™ AI Ultrasonic Obstacle Avoidance, using 18 sensors including dual ultrasonic sensors to detect obstacles and optimize the robot's cleaning route.

A large 10,000mAh lithium-ion battery provides up to approximately 7 hours of water-surface cleaning or 5 hours of floor cleaning, while Smart Water-Surface Parking automatically brings the Sora 70 to the pool edge when cleaning is complete or battery power becomes low.

With app controls, multiple cleaning modes, dual-band Wi-Fi, Bluetooth, one-touch retrieval, optional ultra-fine filtration, and support for pools up to approximately 3,229 sq. ft., the Sora 70 provides comprehensive cordless cleaning for demanding residential pools.

Complete Cleaning from Surface to Deep End

The Sora 70 is designed to clean substantially more than just the bottom of the pool.

Its supported cleaning areas include:

• Water surface

• Shallow-water areas

• Large platforms and tanning ledges

• Pool floor

• Pool walls

• Waterline

In Pro Mode, the Sora 70 can perform a cleaning cycle covering the surface, shallow/platform areas, floor, walls, and waterline.

Shallow-Water & Platform Cleaning

One of the Sora 70's most distinctive capabilities is its ability to operate in shallow water down to approximately 8 inches deep.

This allows the cleaner to address compatible tanning ledges, sun shelves, large steps, and platforms that many conventional robotic cleaners cannot reach.

Beatbot specifies a minimum supported platform area of approximately 3.3 ft × 3.3 ft (1 m × 1 m).

Actual performance depends on the geometry, depth, slope, surface, and dimensions of the shallow area.

JetPulse™ Water-Surface Cleaning

The Sora 70 uses Beatbot's JetPulse™ system to collect debris floating on the surface.

Two converging water jets actively direct floating leaves, insects, and other debris inward toward the cleaner rather than pushing material away from its path.

This allows the same robot that cleans underwater surfaces to also perform dedicated water-surface cleaning.

Powerful 6,800 GPH Suction

The Sora 70 generates up to 6,800 gallons per hour of water flow, giving the filtration system the power needed to collect everything from fine sand to larger everyday pool debris.

Its extended 6.7-inch suction inlet provides a broad intake area as the robot moves across supported surfaces.

SonicSense™ AI Ultrasonic Obstacle Avoidance

Beatbot's SonicSense™ AI Ultrasonic Obstacle Avoidance combines dual ultrasonic sensing with intelligent processing to identify obstacles and adjust the robot's movement.

The Sora 70 uses optimized S-shaped cleaning paths to systematically cover the pool while reducing unnecessary movement and collisions.

18-Sensor Navigation System

A total of 18 sensors, including two ultrasonic sensors, provide the environmental information used for navigation and cleaning-path optimization.

The sensor system helps the Sora 70 adapt to walls, obstacles, shallow zones, platforms, and other supported pool features.

Smart Water-Surface Parking

When a cleaning cycle is complete or battery power becomes low, the Sora 70 automatically rises to the water surface and navigates toward the pool edge.

This Smart Water-Surface Parking system eliminates the need to retrieve the approximately 23-pound robot from the bottom of the pool.

One-Touch App Retrieval

If the Sora 70 has moved away from the edge while floating at the surface, supported controls in the Beatbot App allow you to initiate retrieval with a tap.

The robot then navigates back toward the pool edge for convenient removal.

Because of underwater Wi-Fi limitations, remote navigation and one-touch retrieval are available while the robot is at the water surface, not while it is operating underwater.

SmartDrain™ Automatic Water Release

When the Sora 70 is removed from the pool, SmartDrain™ helps release retained water from inside the cleaner.

Reducing trapped water makes the robot easier to lift, carry, and return to its charging location.

Large 6L Debris Basket

The Sora 70 includes a large 6-liter filter basket, providing substantial debris capacity for everyday pool cleaning.

Its standard filtration system uses a 150-micron filter suitable for common debris such as leaves, insects, hair, sand, and dirt.

Optional 3-Micron Ultra-Fine Filtration

For pools requiring finer particle collection, Beatbot offers an optional 3-micron ultra-fine filter system.

This accessory is designed to capture significantly smaller particles such as fine dust and other microscopic debris.

The ultra-fine filter is sold separately and is not part of the standard Sora 70 filtration system.

Extended Cordless Runtime

The Sora 70 uses a 10,000mAh lithium-ion battery designed for extended cordless cleaning.

Beatbot specifies up to approximately:

• 7 hours of water-surface cleaning

• 5 hours of floor cleaning

Actual runtime varies according to cleaning mode, pool layout, wall climbing, shallow-area operation, water temperature, battery condition, and other operating factors.

Fast 65W Charging

The Sora 70 uses Beatbot's Ultra-Safe Titanium Charging Plug with approximately 65W charging.

A complete recharge takes approximately 4.5 hours under normal charging conditions.

Five App-Controlled Cleaning Modes

The Beatbot App provides access to supported cleaning modes and smart functionality.

Available operating modes include:

• Water Surface Mode

• Floor Mode

• Wall Mode

• Pro Mode

• Standard Mode

• Eco Mode

Mode availability and functionality may vary with firmware and operating conditions.

App & Offline Control

The Sora 70 can be managed through the Beatbot App, while supported offline controls allow essential operation without requiring the phone for every cleaning cycle.

A customizable quick button provides convenient access to frequently used functionality directly from the cleaner.

Dual-Band Wi-Fi & Bluetooth

The Sora 70 supports:

• 2.4 GHz Wi-Fi

• 5 GHz Wi-Fi

• Bluetooth

The Beatbot App is compatible with supported Android and iOS devices, with additional supported functionality through Apple Watch.

Works with In-Ground & Above-Ground Pools

The Sora 70 is designed for both in-ground and above-ground pools that meet Beatbot's operating requirements.

It supports common pool shapes including rectangular, round, kidney, freeform, and other compatible layouts.

Multiple Pool Surface Compatibility

The Sora 70 supports common pool materials including:

• Concrete

• Ceramic tile

• Vinyl

• Fiberglass

Cleaning and climbing performance can vary according to pool geometry, surface condition, steps, ledges, slopes, drains, and other characteristics.

Key Features

Complete Pool Coverage

Cleans the water surface, shallow areas and platforms, pool floor, walls, and waterline.

Shallow-Water Cleaning

Designed to operate in water as shallow as approximately 8 inches.

Platform & Tanning-Ledge Cleaning

Can clean supported platforms measuring at least approximately 3.3 ft × 3.3 ft.

JetPulse™ Water-Surface Cleaning

Twin converging water jets actively pull floating debris toward the cleaner for efficient surface collection.

SonicSense™ AI Obstacle Avoidance

AI-assisted ultrasonic sensing helps detect obstacles and optimize the robot's movement.

18 Advanced Sensors

A network of 18 sensors, including two ultrasonic sensors, supports navigation and environmental awareness.

Optimized S-Shaped Cleaning Paths

Systematic S-shaped movement helps improve cleaning coverage while reducing unnecessary travel.

8-Motor System

An eight-motor architecture powers propulsion, cleaning, brushing, and water-management functions.

6,800 GPH Suction

The high-flow system moves up to approximately 6,800 gallons of water per hour.

6.7" Suction Inlet

An extended 6.7-inch intake opening provides a broad debris-collection path.

Four Bottom Roller Brushes

Four active roller brushes arranged in a Dual-Group Roller Brush System scrub supported pool surfaces.

6L Debris Capacity

The large 6-liter filter basket provides substantial capacity for everyday pool debris.

150-Micron Standard Filtration

The included filtration system captures everyday debris down to approximately 150 microns.

Optional 3-Micron Filtration

An optional ultra-fine filter can capture particles down to approximately 3 microns and is sold separately.

10,000mAh Battery

A high-capacity lithium-ion battery supports extended cordless operation.

Up to 7 Hours of Surface Cleaning

Provides up to approximately 7 hours of water-surface cleaning under supported conditions.

Up to 5 Hours of Floor Cleaning

Provides up to approximately 5 hours of floor cleaning under supported operating conditions.

Up to 3,229 Sq. Ft. Coverage

Designed for pools with up to approximately 3,229 sq. ft. (300 m²) of cleaning coverage.

Smart Water-Surface Parking

Automatically rises to the surface and moves toward the pool edge when cleaning is complete or battery power becomes low.

One-Touch Retrieval

Supported Beatbot App controls allow the robot to return toward the pool edge while it is at the water surface.

SmartDrain™ Water Release

Automatically releases retained water to make lifting and handling easier.

Beatbot App Control

Provides access to supported cleaning modes, settings, surface navigation, retrieval, and smart functions.

Dual-Band Wi-Fi

Supports both 2.4 GHz and 5 GHz Wi-Fi networks.

Bluetooth Connectivity

Integrated Bluetooth supports compatible setup and communication functions.

Cordless Operation

Rechargeable battery operation eliminates a floating power cable while cleaning.

IPX68 Robot Protection

The Sora 70 carries an IPX68 ingress-protection rating for its intended underwater operation.

3-Year Warranty

Beatbot backs the Sora 70 with a 3-year manufacturer's warranty, subject to its applicable warranty terms and conditions.

Specifications

What's Included

• 1 × Beatbot Sora 70 Robotic Pool Cleaner

• 1 × Standard 6L Filter Basket

• 150-Micron Filtration System

• Beatbot Charging Equipment

• Standard accessories supplied with the Sora 70

• Manufacturer documentation

The optional 3-micron Ultra-Fine Dual Filter Basket, pool-cleaner caddy, protective cover, and other accessories are sold separately unless specifically included with the purchased configuration.

Warranty

The Beatbot Sora 70 is backed by Beatbot's 3-year manufacturer's warranty, subject to Beatbot's applicable warranty terms, eligibility requirements, exclusions, and conditions.

Important Shallow-Water Notice

The Sora 70 can operate in water as shallow as approximately 8 inches and can clean compatible platforms or large steps measuring at least approximately 3.3 ft × 3.3 ft.

Actual shallow-water performance depends on depth, platform dimensions, slope, surface, pool geometry, and other operating conditions.

Important App Control Notice

Remote navigation and one-touch retrieval through the Beatbot App are designed for use while the robot is operating at the water surface.

Because Wi-Fi signals do not reliably penetrate pool water, manual app navigation is not available while the Sora 70 is submerged.

Important Filtration Notice

The Sora 70 includes a 150-micron filter basket for everyday pool cleaning.

Beatbot's optional 3-micron ultra-fine filtration system is sold separately and should not be assumed to be included with the standard cleaner.

Important Pool Compatibility Notice

The Sora 70 supports a broad range of pool shapes and materials, but performance can vary depending on pool geometry, shallow areas, steps, ledges, wall angles, drains, obstacles, surface condition, and other characteristics.

Verify compatibility if your pool contains unusually narrow ledges, very small shallow platforms, or specialized surfaces.

Important Charging Notice

Remove the Sora 70 from the pool before charging.

Charge the cleaner using the supplied Beatbot charging equipment in an appropriate dry location and follow Beatbot's requirements regarding moisture, temperature, electrical supply, and equipment placement.

Important Storage Notice

Empty and rinse the filter basket as appropriate after cleaning and maintain the robot according to Beatbot's instructions.

During freezing weather or extended periods of non-use, properly clean, dry, and store the Sora 70 and charging equipment according to the manufacturer's storage requirements.